保定知名化粪池模具厂

玻璃钢化粪池是一个新型的产品，自研发以来深受业内的好评。那么玻璃钢化粪池的制作工艺是怎么样的呢？在制作过程中又是怎样保证产品质量的！

Glass fiber reinforced plastic septic tank is a new type of products, well received by the industry since the development. So how are the making craft of glass fiber reinforced plastic septic tanks? In the process of production and how to ensure the quality of products!

　　内衬制作采用喷射气脱工艺，用混合喷枪，把树脂和短切玻纤混合后，喷射到制衬机上（玻纤切到1-2公分、内衬厚度5毫米），待固化后，从模具上用气（0.25兆帕以上）进行脱模。这个过程也是对产品的一个自检过程。强调说明如果制作过程中漏气，内衬是无法从模具上脱下来的。这种工艺保证100%不会渗漏。这种工艺也是唯一能够检测是否渗漏的手段。

Lining production by gas injection process, using mixed spray gun, the resin mixed with chopped glass fiber, the system of injection to the lining machine (glass fiber cut to 1 to 2 cm, lining thickness 5 mm), after being solidified, from the mold gas stripper (more than 0.25 million mpa). This process is also the product of a process self-inspection. Highlight if air leakage in the production process, lining is unable to take off from the mold. This process to ensure 100% from leaking. This process is also the only tool that can detect whether the leakage.

　　其它厂家均采用的是手工工艺，手工卷板工艺无法具备检测能力，因此无法保证不渗漏。

Other manufacturers adopt manual craft, hand rolled plate process cannot detect ability, so we can not guarantee no leakage.

玻璃钢化粪池的制作流程:

The process of glass fiber reinforced plastic septic tanks:

封头制作 → 内衬制作→组装→充气检测→缠绕→夹砂→缠绕→固化→检测出厂

Head production - lined with production to assembly, inflatable test - - sand - its victims - cure - test factory