| 玻璃钢化粪池结构 |
| 添加时间：2018/1/27 14:30:16 浏览次数： |
| 玻璃钢化粪池结构 Glass reinforced septic tank structure 玻璃钢化粪池发展至今，外形一般为卧式圆筒状，两端封头一般采用力学性能凹凸状面设计，内部设有隔板，隔板上的孔上下错位，不易形成短流，并将整下罐体分成三部分；三级厌氧室、二级厌氧室和澄清室，一级、二级厌氧室底部相通，内部加有“MDS专用特型填料”。这样的分隔减少了污水与污泥的接触时间，使酸性发酵和碱性发酵两个过程互不干扰，同时填料的存在增加了污水污泥与厌氧菌的接触表面积，大大提高了反应效率。它在截流、沉淀污水中的大颗粒杂质、防止污水管道堵塞、减少管道埋深上起着积极作用。 Glass steel septic tank development so far, the general shape is a horizontal cylindrical head, both ends of the mechanical properties of general convex surface design, with internal partitions, partition the holes on the upper and lower dislocation is not easy to form short flow, and the whole body is divided into three parts; the three stage anaerobic chamber, two stage anaerobic chamber and a settling chamber. One stage and two stage anaerobic chamber communicated with the bottom, "MDS special type packing material and internal". This separation to reduce the contact time of the sewage and sludge, acid fermentation and fermentation process of alkaline two do not interfere with each other, and the filler is increased by the presence of sewage sludge and anaerobic contact area and the reaction efficiency was greatly enhanced. It plays a positive role in intercepting, settling large particles of impurities in sewage, preventing the blockage of sewage pipes and reducing the buried depth of pipelines. |
| 上一页 化粪池模具维护的常用方法 |
| 下一页 化粪池模具的使用寿命如何 |
Copyright © 技术支持：遨游网络