保定知名化粪池模具厂

化粪池模具的结构外形一般为横放的圆筒状,两端封头一般采用力学性能良好的车轮状凹凸面设计,内部设有相通的隔舱板,隔舱板上一般设有立体弹性填料,用来截留更多的厌氧细菌。而新型化粪池模具比常见的多了一道发酵腐化的工序,工艺更细化,水质更干净。化粪池应设计与绿化带内,若置于道路地段,可通行人及小型车,,混凝土厚度不低于 15cm。化粪池模具爆裂原因有很多,今天我们先从加工工艺方面简单说一下：模具材质不好在后续加工中容易碎裂,热处理,淬火回火工艺不当产生变形;模具研磨平面度不够,产生挠曲变形;模具强度不够,刀口间距太近,模具结构不合理,模板块数不够无垫板垫脚;线割处理不当,拉线线割,间隙不对,没作清角;冲床设备的选用,冲床吨位,冲裁力不够,调模下得太深;生产前无退磁处理,无退料梢;生产中有断针断弹簧等卡料;叠片冲压,定位不到位,模板有裂纹仍继续生产。

The structure and shape of the septic tank die are generally in the form of a horizontal cylinder, and the end seal head is generally designed with a good mechanical wheel concave convex surface, with a interconnected spacer plate inside, and a three-dimensional elastic packing on the board, which is used to intercept more anaerobic bacteria. The new septic tank mold is more common than the usual fermentation and putrefaction process, the process is more detailed and the water quality is cleaner. Septic tanks should be designed with green belts, if placed in road areas, passable persons and small cars, and concrete thickness of not less than 15cm. There are many reasons for the bursting of septic tank molds. Today, we first simply say from the processing technology that the mold material is not easy to crack in the subsequent processing, heat treatment, quenching and tempering process is unsuitable to produce deformation; the mould grinding planeness is not enough to produce flexure deformation; the die strength is not enough, the gap between the blade is too close, the die structure is unreasonable, die The plate number is not enough without the cushion foot pad; the line cutting is improper, the drawing line cutting, the gap is wrong, no clear angle; the selection of the punch equipment, the punching machine tonnage, the blanking force is too deep; no demagnetization treatment, no redeing tip before production; the production has broken pin spring and other cards; the laminated punching, the positioning is not in place, the template has cracks continue to produce.

而需要注意的是：要想更好的使用化粪池,就一定要进行定期维护和清理。化粪池模具如果出现损坏或失效是十分严重的问题,操作人员应注意平时在使用模具时保养好模具,由于大部分模具是由高分子质料建造而成的,因其质量轻,价格便宜,易建造成各而被广泛应用在各项工程。我们要注意模具的老化问题,由于份子化合物在蕴藏和陈设历程中,在外界因素综合作用下,由于主链的交联和裂解而逐渐发生质量变化,使性能变坏的现象就是份子化合物制品的老化,操作人员一定要注意防止模具发生老化现象。我们可以观察模具的外观变化,如出现严重裂纹或剥落要及时处理,不能继续使用.其次就是要注意物理性质的变化,防止稳定的过高或过低,引起化粪池模具发生老化。化粪池模具是一种利用沉淀和厌氧发酵的原理,去除生活污水中悬浮性有机物的处理设施,属于初级的过渡性生活处理构筑物。

What we should pay attention to is that if we want to better use septic tanks, we must carry out regular maintenance and cleaning. If the septic tank mold is damaged or invalid, the operator should pay attention to the maintenance of the mold when the mold is used in peacetime. Because most of the moulds are made of high polymer material, it is widely used in various projects because of its light quality, cheap price and easy construction. We should pay attention to the aging of the mold. As the component compounds are stored and furnished, the quality changes due to the crosslinking and cracking of the main chain, and the deterioration of the properties is the aging of the components of the components. The operator must pay attention to prevent the aging of the die. We can observe the appearance changes of the mold, such as serious cracks or exfoliation in time to deal with, can not continue to use. Secondly, we should pay attention to the physical properties of changes, prevent the stability of too high or too low, causing septic tank die aging. The septic tank mold is a kind of primary transitional life processing structure, which uses the principle of precipitation and anaerobic fermentation to remove the suspended organic matter in domestic sewage.